Linksys Extender Setup Manual [RE6300 & RE6400]
No matter what brand of Wi-Fi range extender you are using, all you have to install Wi-Fi range extender to expand the Wi-Fi network coverage area. One such Wi-Fi range extender is Linksys. The brand is popular for its best network-based devices. Unfortunately, most of the standard Wi-Fi routers failed to deliver signals from multiple walls and floors. In such cases Linksys RE6400 and RE6300 Wi-Fi extenders come to the rescue. However, many users have the same question : how to do Linksys extender setup.
So, for all those who are having the same question in their mind, this guide is for them. Here we are going to explain two different Linksys extender setup methods for RE6300 and RE6400. So that you can enjoy the Wi-Fi signals in every corner of your home.
How to Install Linksys Wi-Fi Extender?
Before configuring the Wi-Fi extender, it is important to install it correctly. The installation of Linksys extender is quite important. Consider the below-mentioned for Linksys extender setup RE6400 and Linksys RE6300 setup installation.
- Begin with the power supply. All attach all the antennas to the range extender. To get the best possible signal reach, keep the antennas at the angle of 45 degrees.
- Find an ideal position to place your Wi-Fi range extender. Keep the Wi-Fi range extender and router near to each other (Only while performing setup process).
- Once you have placed your Linksys extender, check the LED lights.
Now, your Wi-Fi range extender is ready to setup. So, let’s roll the balls!
Linksys Extender Setup Methods
There are two methods to set up Linksys Wi-Fi range extender. You can consider any of these two as per your ease or convenience.
- Manual or Ethernet cable method
- WPS method
Method #1: Linksys Extender Manual Setup
- Connect your Linksys extender to the router via an ethernet cable.
- Take another ethernet cable and connect your Wi-Fi extender to your computer.
- Run any web browser and access extender.linksys.com web address.
- You land on Linksys extender setup web page.
- Enter the default Wi-Fi extender login credentials, and then click on the ‘Login’ button.
- Select the Wi-Fi extender mode.
- Find your home network and enter its passphrase key.
- Click on the ‘Next’ button to begin the setup process.
- Follow the on-screen instructions carefully. Once done, click on the ‘Finish’ button.
Method #2: Linksys Extender Wi-Fi Protected Setup Method
Apart from the Linksys extender manual configuration, you can set up Linksys extender via WPS method. It is the quickest method to configure any Wi-Fi range extender. All you have to do is push the button to set up your Wi-Fi range extender.
- Place your Wi-Fi extender near to your existing router.
- Plug-in both the devices (Wi-Fi extender and router) to electric power source.
- Turn on both the devices and wait for a few minutes.
- Find the WPS button on your Wi-Fi range extender and press it.
- Your range extender has been set up successfully.
- Now, unplug it and place it some other location.
So, these are two methods that you can implement for Linksys RE6400 setup and Linksys RE6300 setup. If any queries are left in your mind, feel free to ask via the comments section.
